| Windows ME DSL Configuration |
| 1 |
Click the Start button. Choose Settings,
then Control Panel. |
 |
| 2 |
Double click the Network icon to continue. |
 |
| 3 |
You should see your Network card (in this case, a NetGear FA311
NIC) listed, as well as TCP/IP. Select TCP/IP
and click Properties. |
 |
| 4 |
- Choose Specify an IP address. Fill in one of your Static IPs that was given to
you by Pilosoft Inc. in the IP Address field.
- Enter 255.255.255.0 for the Subnet Mask.
Click the WINS Configuration tab to continue. |
 |
| 5 |
Make sure Disable WINS Resolution is selected. Click
the Gateway tab to continue. |
 |
| 6 |
Enter the Gateway IP address supplied to you by Pilosoft Inc
in the New gateway field, then click Add. Click the DNS Configuration tab to continue. |
 |
| 7 |
- Make sure Enable DNS is selected.
- Enter your username in the Host field.
- Enter pilosoft.com in the domain field.
- Enter 216.66.12.246 in the field below DNS Server Search Order and click Add.
- Enter 216.66.12.242 in the field below DNS Server Search Order and click Add.
- Click OK to continue.
|
 |
| 8 |
Click OK to complete your setup. Your computer will
ask to be restarted. Go ahead and restart. Once you
have rebooted, open a browser to confirm the connection
is working. |
 |
